Fluid Grid Art: Watercolor Experiments with Salt, Foil, Leaves and More

November 04, 2026•5 min read

Play with watercolor and other fluid paints, one grid and lots of happy accidents

Most watercolor experiments you see online are done one at a time. One technique, one page, one result.

In this Grid Art session I wanted to do it differently. Instead of one experiment per page, or one per section, I’m mixing everything together in every section. Salt, foil, leaves, alcohol, acrylic ink. All at the same time. Then we wait and see what happens.

Most of these experiments are tips from the comments on my earlier videos, so this one is a co-creation. Thank you for that!

It’s not about getting a specific result. It’s about the process, and I’m glad to say the results surprised me too. Let’s play and see where it takes us.

Materials:

  • Watercolor paper (go for a thicker paper, because thin paper can wear through when it gets very wet)

  • A board you can move around

  • Tape to mark your grid

  • Watercolor from a pan or liquid watercolor, in colors you like

  • A brush

  • A spray bottle with water

  • A dropper (optional)

  • Salt (sea salt gives chunky textures, regular salt works too)

  • Aluminum foil or plastic wrap

  • A few leaves

  • Rubbing alcohol

  • Acrylic ink or Ecoline (optional)

  • A candle or oil pastel for a resist (optional)

  • A fine-tip bottle with paint mixed with airbrush medium (optional)

  • A heavy book

  • A heat gun (optional)

Instructions:

  1. Tape your grid.
    Tape down your paper in a grid, just like you do in any Grid Art session. Do it on a board, so you can move it around if you want to. Things are going to get wet.

  2. Start with color.
    Wet your brush and brush watercolor all over the page. Don’t think too much about it. Spritz some water on top and add a few different watercolor marks. I used Autumnal colors like greens, oranges, and yellows. Add some darker tones too, because it’s easy to forget those.

  3. Keep it wet.
    The wetter it is, the more the colors can move and mix. Spritz it, drop some water on it, or tilt your board and let the paint run.

  4. Add your ingredients everywhere.
    This is the fun part. Don’t give each section its own experiment. Put a bit of everything in every section, and let it all mix:

    Leaves: place a few on the wet paint. Some lie flat, some don’t, and that’s fine.
    Salt: sprinkle some into the wet paint.
    Alcohol: drop it in. You’ll see the effect better if the paint is a bit drier first.
    Acrylic ink or Ecoline: drip it on top of your watercolor, on a leaf, or on the salt.
    Foil: crumple it up and place it on top of the wet paint. It doesn’t have to be neat.

  5. Add a bit more color.
    Add extra color on top of the ingredients, then move your board and let it all blend. It might look messy at this point, and that’s part of it. Throwing everything together means you can’t predict what each ingredient will do.

  6. Wait.
    This is the hard part. Let it dry as it is, ideally overnight. Put a heavy book on top if you want to press the leaves down. The foil doesn’t need the book.

  7. Reveal.
    Remove the book, foil, leaves, and salt. Look for the wrinkles from the foil, the marks left by the leaves, and the textures around the salt.

  8. Tip: don’t use a heat gun while the paint is still fluid.
    It can make the foil effect disappear. If the paper is nearly dry, you can use it to remove leftover salt.

  9. Check your tape.
    Don’t throw it away yet! The tape can carry beautiful marks, so you can use it in an art journal or collage.

  10. Add more fluid layers if you like.
    Try a fine-tip bottle filled with paint and airbrush medium for lines or leaf shapes. If something is too fluid, press a piece of paper on top and see what that leaves behind.

Liquefy your other materials

If you don’t have liquid paints, you can turn other things into fluid:

  • Water-soluble crayons or pencils (like Inktense): touch them with a wet brush or dissolve them in water.

  • Neocolor-style crayons: scribble on a palette, add water, and use it like watercolor.

  • Resist before you paint: draw on the dry paper with a candle or oil pastel, then paint over it. It’s more predictable, but still fun.

Final Thoughts:

Not everything in this experiment worked, and that’s fine. Part of the tape came off, and the final result looked more Christmas than autumn. But I loved the textures from the foil, the marks from the leaves, and the tape I could still use.

What I like most is that each section gave me something different, so there was a lot to respond to afterwards.

Take a moment to look at your own page. What surprised you? What would you do differently next time?

What's Next?

Explore further

If you enjoyed this grid experiment, you might also like:

Try a variation

Repeat this with different materials, colors or rules. Use a different ingredient in each section, or try the same one in every section and compare. Small changes often lead to completely different results.

Reflect & continue

Take a moment to look at your own page. What surprised you? What would you do differently next time? What felt uncomfortable? What would you like to explore next?

If you'd like to go further with this way of working, you'll find all my online classes here: https://annabvl.com/courses.

If you make something, I'd love to see it. Share it on Instagram and tag me, or leave a comment below.
If you want to stay updated, subscribe to my newsletter

Back to Blog